- Plug in your light bar and charge for 4-6 hours.
- Check your 4 pin plug and make sure wiring is correct. (Industry standard 4 pin) Your truck should be wired (starting with the silver pin going clockwise looking at it from the back of the truck) silver pin is ground, next is tail / running lights, next is left turn, next is right turn. Our transmitter is wired like this:
- Plug transmitter into your vehicle's socket
- Turn on the power switch on the light bar, the red light on the switch will illuminate when turned on.
When not using the light bar, keep it charged. If you have any issues recharging the battery, plug the cigarette lighter adapter into the vehicle, but not into the light bar. If the LED on the cigarette lighter adapter is not lit, the fuse is most likely blown. Replace the fuse with a 5 amp fuse. When charging the light bar, the green LED on the back of the light bar will light. If LED is not lit, check your connections to make sure you are getting power.