Wiring Instructions for the STR3 Strobe Lights

These instructions apply to the following strobes: STR3A, STR3R & STR3W

To make lights wig-wag:

1. If you have 2 lights and you want to Wig-wag or asynchronize, connect the red wires from both lights together and then to a switch for 12V Power.
2. Connect both black wires together for ground.
3. Connect the amber/green wires together from both lights.
4. Connect the orange/blue and the red/black wire from ONE light to the black ground wire.
5. Now turn on the power and your lights will be asynchronous and wig wag on 20 different patterns.

You must wire both white wires together and touch them to the hot wire to change patterns.

To make lights synchonize:

1. Connect the red wires together and to a switch for 12V power.
2. Connect both black wires together for ground.
3. Connect the amber/green wires together from both lights.
4. Connect the orange/blue and the red/black wire from ONE light to the black ground wire.
5. Connect the orange/blue wire from the 2nd light to the ground wire and turn on the power.and your lights will be synchronized on 20 different patterns.

You must wire both white wires together and touch them to the hot wire to change patterns.