LIW-25O-4 Instructions

Please make sure to register your product. No warranty work will be done on unregistered products.

1. Plug the transmitter into your vehicle's 4 pin connector
2. Place the unit with the 3/4" LED on the left side of the case on the left side of the vehicle, place the other unit on the right side of the vehicle.
3. Turn on both units using the rocker switch on the opposite side of the 3/4" light. The rocker switch will illuminate with a red LED.
4. Test the markers, left and right turn signals, and brake lights.

You cannot overcharge the battery in the light bar, so keep the bar on the charger when not in use.

The batteries will resist developing a memory so you do not have to discharge them all the way. However, they must be charged on a regular basis to prevent them discharging to a very low voltage level.

If you have any issues recharging the battery, plug the cigarette lighter adapter into the vehicle, but not into the light bar. If the LED in the cigarette lighter adapter is not lit, the fuse is most likely blown. Replace the fuse with a 5 amp fuse.